Skip to content.Skip to navigation
Use a small blow hammer to seat bearings. Pre-cleaning and freezing bearings can help them slide into place more easily. Gear Set Installation: Align the countershaft with the needle bearing assembly.
When installing a high-performance clutch, press the new hub into the basket and use red Loctite on the reverse-thread nut, tightening to 50–60 ft-lbs . 3. Maintenance and Lubrication Drive | PDF | Transmission (Mechanics) | Gear - Scribd Ultima 6 Speed Rsd Transmission Manual
Slowly slide the gear set in until the mainshaft and countershaft seat fully. Use a small blow hammer to seat bearings
Includes a billet trap door and a 32-tooth pulley . 2. Installation Guide When installing a high-performance clutch, press the new
Reinforced case machined from permanent mold A356-T6 aluminum . Internal Ratios: 1st Gear: 2.94:1 (Close ratio) 2nd Gear: 2.21:1 3rd Gear: 1.60:1 4th Gear: 1.23:1 5th Gear: 1.00:1 6th Gear: 0.86:1 (Overdrive)
The Ultima RSD transmission is engineered for durability and smooth shifting with the following features: