Isis-proteus-7-7 -

Click the icon (blue square) in the left toolbar.

Enter a (e.g., VCC, GND) and a Pin Number that matches the physical footprint. Create the Device :

Click to finish. Your new "piece" will now appear when you search the library with the Pick from Library (P) button. Alternative Methods isis-proteus-7-7

: Click Next to link a PCB footprint (from ARES) if you plan to design a board later. Save to Library :

In Proteus ISIS 7.7, "generating a piece" typically refers to that isn't already in the standard library. Step-by-Step: Generating a New Component Follow these steps to create a custom schematic part: Draw the Component Body : Click the icon (blue square) in the left toolbar

: For digital testing, you can use the Digital Pattern Generator instrument to "generate" signal patterns (pieces of data) for your simulation. Make a New or Custom Part in Proteus -Step by Step Guide

: If a similar component exists, place it, right-click, and select Decompose . Modify the pins or graphics, then follow the "Make Device" steps above to save it as a new version. Your new "piece" will now appear when you

Click and drag on the schematic sheet to draw the shape of your component. : Select Component Pin Mode (the icon with a dot and a line).