Features a 3-part ceramic door with a safety cut-off switch and a slip clutch drive mechanism to prevent excessive pressure. Programming Steps (Keypad Operation) Initiate: Press the S1 button to start programming. Adjust: Set the heat rate (e.g., 10∘C10 raised to the composed with power C 300∘C300 raised to the composed with power C Set Hold Time: Set the duration (e.g., 30 minutes).
Sinter up to 60 units (or 80-90 depending on configuration) with two 120mm trays, including capability for full-arch bridges.
Use the function key for special features like pre-drying or ventilated heating. Technical Specifications Power: 3200 W (3.2 kW). Voltage: 200-240 V, 50-60 Hz. Weight: 60 kg. Dimensions: 390 mm (W) x 500 mm (D) x 790 mm (H). HTS-2/M/ZIRKON-120 Oven: In Office Training
by Mihm-Vogt is a high-performance dental sintering furnace designed for conventional and speed sintering of zirconia. It features four molybdenum disilicide ( MoSi2cap M o cap S i sub 2 ) heating elements, a maximum temperature of 1650∘C1650 raised to the composed with power C
Capable of speed sintering with heat rates up to 120∘C120 raised to the composed with power C per minute. Features a 3-part ceramic door with a safety
HTS-2/M/ZIRKON-120 Go to product viewer dialog for this item.
For detailed maintenance and troubleshooting, you can download the Original Operating Manual . HTS-2/M/ZIRKON-120 Oven: In Office Training Sinter up to 60 units (or 80-90 depending
Program up to four steps including heating, sintering, and cooling, ensuring all 4 lines are used.